Gutter repair
One dripping corner, a run that sags in the middle or a section a falling limb bent flat. A lot of gutter problems can be fixed without replacing the whole system.
Gutter repair is the work that keeps an existing system running: resealing joints, adding or replacing hangers, re-pitching a run that holds water, swapping a damaged section and reattaching gutters that have pulled loose. One visit is usually enough for a gutter company to tell you whether a repair will hold or whether you'd be paying to patch something that's worn out.
What gets repaired most often?
- Leaky corners and end caps. Sealant dries out and cracks over time. The joint can be cleaned and resealed, or the corner piece replaced.
- Sagging runs. Usually hangers that have backed out or were spaced too far apart, plus the weight of wet leaves and standing water.
- Gutters pulling off the house. Often rotten fascia underneath. The wood has to be fixed before any screw will hold.
- Standing water. The run has lost its slope and needs to be re-hung.
- Bent sections. From limbs, ladders or ice. Short pieces can be replaced, though an exact color match on older gutters isn't guaranteed.
- Loose downspouts. Straps and elbows separate and start dumping water against the wall.
What should I do after a storm damages my gutters?
- Look before you climb. Stay off the ladder if a gutter is hanging or there are wires anywhere close.
- Clear the area under a loose section so nobody walks beneath it.
- Photograph the damage and any fallen limbs for your insurance company.
- Call. A gutter company can secure or take down the loose piece and quote the fix.
When does repair stop making sense?
Repair is the right call when the problem is limited to a couple of joints, a few hangers or one bad section and the rest of the system is solid. Replacement starts to win when leaks keep showing up at seam after seam, the metal is rusted or cracked, the gutters are too small for the roof, or you're about to add guards and want them on gutters that will last as long as the guards do.
Why do clean gutters still overflow?
The usual causes are too few downspouts, a downspout or buried pipe that's clogged, a run sloped the wrong way, or a gutter that's simply too small for the roof section above it. Roof valleys are a frequent culprit, because they pour two slopes' worth of water into one corner. A diverter or splash guard at that corner, an extra downspout or a larger gutter usually fixes it.
What affects repair cost?
- What failed. Resealing one corner costs less than re-hanging a whole run.
- Wood damage. Rotten fascia has to be replaced first.
- Height and access.
- Parts. Older profiles and colors can be hard to match.
We don't quote prices. The gutter company sets the price after it measures the runs, counts the downspouts and sees how high and steep your roof is, so treat any number given over the phone as a rough starting point.
Where we connect you with help
Common questions
Will insurance pay for storm-damaged gutters?
Sometimes, when the damage comes from a covered event like wind or a falling tree. Wear and age usually aren't covered. Ask your insurer.
Is caulk enough to fix a leaking seam?
Gutter sealant on a clean, dry joint can stop a drip for a while. If the same seams keep failing, the corners or the gutter likely need replacing.
Related services
More background: Lynchburg gutter guard guide.
Gutters spilling over every time it storms?
Call and get connected with a local gutter company that can look at your roofline and quote guards.